All accessories

Category

27 accessories shown out of 27

Accessories in the range

Red cylindrical roller with its bearing visible at the end

Rollers

Carrier roller

Material: Carbon steel Q235 / HDPE (optional). Painting / powder coating / hot dip galvanizing.

  • Carbon steel Q235
Three light grey rollers linked end to end by their shafts

Rollers

Ceramic roller

Material: High-hardness ceramic tube + high-strength steel sleeve. Alumina ceramic or silicon carbide (SiC) tubes; high-temperature sintering of the ceramic ...

  • Rollers
  • Customizable
Black cone-shaped roller

Rollers

Cone roller

Material: High-strength carbon steel / alloy steel. Anti-rust painting / powder coating.

  • Rollers
  • Customizable
Red roller mounted on the end of a steel shaft

Rollers

Conveyor guide roller

Material: Carbon steel Q235 / stainless steel / UHMW-PE. Painting / powder coating / galvanized / rubber coated.

  • Carbon steel Q235
Black roller with a wide circular flange at one end

Rollers

Friction idler roller

Material: Q235 carbon steel / stainless steel. Metal roller shell, rubber friction layer, anti-slip wear-resistant surface.

  • Q235 carbon steel
Black roller with a white end cap

Rollers

HDPE roller

Material: HDPE. HDPE roller body, integral polymer surface, low-friction wear-resistant layer.

  • HDPE
Black roller fully fitted with rubber rings

Rollers

Impact roller

Material: Q235 / Q345 carbon steel. Steel roller shell, elastic rubber cushioning layer, shock-absorbing wear-resistant surface.

  • Q235
Grey metal roller wrapped with a spiral strip

Rollers

Spiral roller

Material: High-strength carbon steel. Metal roller body, spiral rubber strip layer, anti-sticking, self-cleaning surface.

  • Rollers
  • Customizable
Troughing idler with a blue frame: a centre roller and two flared cone-shaped wing rollers

Idlers

Cone self-aligning idler

Material: High-strength steel. Metal idler shell, rubber layer, patterned wear-resistant surface (cone-guiding design).

  • High-strength steel
Troughing idler with a grey frame: three black rollers, the wing rollers on pivoting brackets

Idlers

Friction self-aligning idler

Material: High-quality carbon steel or alloy steel. Metal idler shell, rubber friction layer, anti-slip, wear-resistant surface.

  • Idlers
  • Customizable
Troughing idler with a red frame fitted with rubber-ring rollers

Idlers

Impact idler

Material: High-quality steel / stainless steel options. Steel idler shell, elastic rubber rings, shock-absorbing wear layer.

  • High-quality steel
Return idler with a blue frame: two long black rollers flaring into cones at the outer ends

Idlers

Return cone self-aligning idler

Material: Carbon steel / HDPE / stainless steel. Metal idler shell, rubber layer, cone-patterned guiding surface.

  • Carbon steel
Spiral roller mounted between two black brackets

Idlers

Spiral idler

Material: High-strength carbon steel. Steel idler body, spiral steel blade, optional rubber wear-resistant layer.

  • Idlers
  • Customizable
Troughing idler with a grey frame fitted with three red rollers

Idlers

Transition idler

Material: Carbon steel / HDPE / rubber coated. Metal idler shell, rubber protective layer, smooth tapered transition surface.

  • Carbon steel
Troughing idler with a red frame fitted with three black rollers

Idlers

Troughing idler

Material: Q235 carbon steel / stainless steel. Steel idler shell, protective anti-corrosion layer, wear-resistant rubber surface.

  • Q235 carbon steel
Pulley covered with a grid of ceramic tiles, mounted on two bearing blocks

Pulleys

Ceramic lagged pulley

Material: Carbon steel (Q235 / Q355) or stainless steel. Hot vulcanizing high-alumina ceramic tiles (with or without dimples) into a high-elastic rubber matr...

  • Carbon steel (Q235
Pulley with an orange lagging, mounted on two bearing blocks

Pulleys

Polyurethane lagged pulley

Material: Q235B / Q345B carbon steel. High-performance polyurethane (PU) elastomer; grit-blasting of the steel shell for adhesion; hot-cast pouring or cold b...

  • Q235B
Pulley with a black diamond-grooved rubber lagging, mounted on two bearing blocks

Pulleys

Rubber lagging pulley

Material: Q235B / Q345B carbon steel. High-grade natural or synthetic rubber; grit-blasting of the steel shell; cold bonding or hot vulcanization.

  • Q235B
Drive pulley covered with ceramic tiles, with its drive shaft visible

Pulleys

Ceramic lagged drive pulley

Material: Carbon steel / Q235 / Q345. High-alumina ceramic tiles with a raised dimple profile embedded in a high-tension rubber matrix; grit-blasting of the ...

  • Carbon steel
Drive pulley with a grooved black rubber lagging, with its drive shaft visible

Pulleys

Rubber lagged drive pulley

Material: Carbon steel (Q235 / Q355) / cast steel. High-abrasion natural or SBR rubber; grit-blasting of the steel shell + hot vulcanization (in an autoclave...

  • Carbon steel (Q235
Red pulley with longitudinal slots, mounted on two bearing blocks

Pulleys

Self-cleaning wing pulley

Material: Carbon steel (Q235 / Q345). Precision welding of radial wings + sandblasting + anti-corrosion epoxy coating.

  • Carbon steel (Q235
Belt cleaner with a red blade on a blue cross-bar and two vertical brackets

SCRAPPERS

H-Type polyurethane belt cleaner

H-Type Polyurethane Belt Cleaner provides primary cleaning at the head pulley for reliable carryback control and belt protection.

  • Primary belt cleaner
  • Polyurethane
Belt cleaner with a red blade on a blue cross-bar tensioned by two springs

SCRAPPERS

P-Type polyurethane belt cleaner

P-Type Polyurethane Belt Cleaner removes fine carryback from belt conveyors while protecting the belt surface during continuous operation.

  • Secondary belt cleaner
  • Polyurethane
Belt cleaner with a row of carbide blades on individual holders, mounted on a blue cross-bar

SCRAPPERS

H-Type tungsten carbide belt cleaner

H-Type Tungsten Carbide Belt Cleaner delivers heavy-duty primary cleaning for abrasive bulk material conveyor systems.

  • Primary belt cleaner
  • Tungsten carbide / alloy carbide
Belt cleaner with carbide blades lined up under a blue cross-bar

SCRAPPERS

P-Type tungsten carbide belt cleaner

P-Type Tungsten Carbide Belt Cleaner removes stubborn fine carryback from abrasive conveyor applications with long service life.

  • Secondary belt cleaner
  • Tungsten carbide / alloy carbide